Waste Water Treatment Manufacturers
There is release of variety of waste from both domestic and industrial such as water, solids and gases. These wastes are absorbed into the environment and can be dangerous. The harm made to the environment can, however, be reduced by taking waste through treatment plants. The end products of the waste treatment plants includes clean water, harmless biodegradable and recycled products The treatment process for the waste depends on the source and type of waste. Wastewater is a produced in typical all process including homes and industries. There are different stages of the wastewater treatment process.
Most homes treat their water using the septic system The septic system is not complicated but should always be functional mode. Septic systems serving a larger number of people are more complex since they have to absorb a higher volume of waste. There are however wastewater treatment plants for use in high factories and residential estates. There are manufacturers of wastewater treatment plants and can help with the design and construction of wastewater treatment plant. They will design the plan according to the project specific needs. They have engineers who will oversee the whole project from the design stage to the monitoring and maintenance tasks. These are a sophisticated process that requires large investments. These systems remove quality clean water and thus used at commercial levels.
There are three main stages in the water treatment process. Water flows to reservoirs either by pumping or gravitational force. There is removal of floating and suspending solids in the reservoirs. The process involves use of centrifugal force. The process can remove the about 60% of the suspended solids. Chemicals can be used at times to increase the removal of solids. water is then pumped to the secondary stage which is referred to as the organic stage. In the second stage, the remaining biodegradable and suspending articles are given as food to organism such as fish. The organism in the water eat the food particles in the water remove the phosphate and nitrates nutrients in the water. About 80% of water impurities is removed at this stage. The water that is released into the environment at this stage is not harmful.
The third stage is however introduced to make the water pure. This phase is known as tertiary level, and the water released here can be used for different purposes. There is application of different water treatment chemicals to make it safe. Chlorine is used to purify the water though it has been disputed in the recent times.
Water pumped into the wastewater treatment plant should not contain industrial chemicals. The individual factory releasing such waters should take individual responsibility by establishing a treatment plant at their base before releasing such water.
Supporting reference: click reference